|
|
|
#1
|
|||
|
|||
mercedes 280se no forward or reverse
I've been a big ford man for years & have always loved the older mercedes se models. I purchased a 1977 280 se for almost nothing with 140,000 miles on the clock from a dear old lady & it ran very well for 6 months but now it won't move. The tranny oil is clean & its full. A friend towed it home & the engine was running so i put it in drive to see what happened. Around 20mph the tranny started working but when i slowed down it appeared to be in neutral. My guess & i'm only guessing is that it is either vacuum problem, o ring or maybe the governor. I've also considered the torque convertor but feel its unlikely because it made no noise at all, it just wouldn't move when i stopped the car. I would appreciate any help I can get.
Last edited by Westy; 06-26-2006 at 03:24 AM. |
#2
|
|||
|
|||
Since the trans tries to work while towing then the MOST likely problem is the front pump.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|