|
|
|
#1
|
||||
|
||||
280e euro has cracked intake, anybody have one?
my favorite machinist was assembling my euro 280e motor and found a crack in the intake down by the butterfly that is under the big injection metering flap. the shaft on the butterfly is also bowed up and it is stuck. (tight as a wax ball in a bull's a%s) as he likes to say.
it looks like the flood came up and filled that area with water then it froze cracking the aluminum intake and bowing up the butterfly. anybody have one lying about that they can part with? too bad a few years back i junked out a 280e which had a blown rod. we pulled off all the things that i imagined we might ever need. but not the intake! of course. i have plenty of stuff i dont need though! tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
Bookmarks |
|
|