According to my technical manual for 1991 covering my 1992 W124 030. I was looking up the tork values & setting for my automatic transmission 722.414 I was looking for the pan hex bolts to fasten transmission pan with filter and gasket and the correct tork setting in Inch pounds Vs Neuton meters.

Tell me if this sounds correct Hex bolts for fastening oil pan --------8 NM

Hex bolt drain plug on torque converter and oil pan -----------------14 NM
What is the math for converting Neuton meters to inch pounds?

Another question never clarified was does a 124 Sportline have the same transmission as a same 300-E for 1992 with out the sportline added on. Are the transmissions set differently for gearing referring to the 722.414 transmission I found in the manual for USA model 124 030 with a M103 983 L6 motor.
My 300-E seems faster off the line than an equal 1987 300-E with the same motor and transmission.

Thank You
Bob Geco