Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-07-2006, 04:38 PM
handedan
 
Join Date: Jul 2006
Location: so calif
Posts: 1
Unhappy 89 300e air conditioning

I Am Having Trouble With Ac Service On My 300e. I Cannot Get The Suction Side To Accept A Charge It Will Not Create Enough Of Something That Will Draw The Refrigerant Into The Sytem Even If The Compressor Is Manually Engaged W/ A Bypass Of The Low Pressure Switch. Is There A Trick And I Am Missing It? Any Help Will Be Gratfully Appreciated
Thanks In Advance
Dan

Reply With Quote
  #2  
Old 07-07-2006, 09:19 PM
whunter's Avatar
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,416
Answer:

I have tried to answer you by PM...
However your box is over full.

Best guess:
It is full of sent messages or confirmations that need to be deleted.

Your PM with further data not in this post.
automatic a/c

--------------------------------------------------------------------------------

hello im new on this site.
got a problem 1989 300e. The a/c stopped blowing cold so i went ahead and serviced the system tried one can of r-12 and compressor did not come back on. so went to the good old manual mode of turning the compressor on and did not get any action from the suction side , it will not pull the r=12 into the
system. is there a filter in the system, i believe its called a orfice tube and if so where is it.? moms mad cause her ride does not make cold air so she takes my
truck. any help would be appreaciated.
please excuse the punctuation but i hope the message gets thru. the car has 230,000 miles on the clock mom would part with a grandkid before she would part with this car,
help help help thanks dan



Questions:
#1. Why do you think it needs refrigerant charging?
#2. is the compressor clutch engaged?
#3. What is current system pressure, static and High/Low side running?

Last edited by whunter; 07-07-2006 at 09:25 PM.
Reply With Quote
  #3  
Old 07-07-2006, 09:33 PM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,667
Are you trying to charge into a vacuum?

__________________
Jim
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page