|
|
|
#1
|
|||
|
|||
107 intake manifold question
Hi All,
I've been absent from the board for several months.... 107 project was on hold while we built a new house. All done and moved in with a new bay for the 107! Anyway, Can anyone tell me if there is any difference between the intake manifold from a '79 450SL and an '82 380SL? I just picked up a manifold off ebay to start monkeying around with an EFI project, and wanted to make sure they're compatible (port locations/plumbing/etc). It doesn't matter so much if sensors are in different areas, etc. as long as it bolts up properly. Thanks in advance, and glad to be back!! --Jay Swann |
#2
|
||||
|
||||
The intake manifold from an m117 will NOT fit on an m116, it will be too wide. Just like an m116 one is too narrow for an m117.
__________________
Current: 2021 Charger Scat Pack Widebody "Sinabee" 2018 Durango R/T Previous: 1972 280SE 4.5 2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi" 1999 Chrysler 300M - RIP @ 221k |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|