PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Please Help With Finding Sensor (http://www.peachparts.com/shopforum/tech-help/161441-please-help-finding-sensor.html)

kweku 08-14-2006 11:44 AM

Please Help With Finding Sensor
 
I own a 1988 300 e. I just had a new o2 sensor put in due to the code 5 that came on but now,code 4 came on. Accordong to my mech it is an AIRFLOW POSITION SENSOR or AIR FLOW POTENTIOMETER. The problem is I can't find the freakin thing anywhere.
Any directions please.

Larry Delor 08-14-2006 08:39 PM

Remember what the K-Jetronics look like? They have that plate that moves up with the corresponding airflow (after the air has been filtered). You have a gadget like that...on the side you ought to see a connector, I believe that is what you are looking for.
Not sure if you can replace just it, or if you have to get a whole new kaboodle. If you do, it'll cost you $$

If I am wrong, someone please say so!

Rick76 08-14-2006 09:10 PM

The actual potentiometer is not available from Mercedes but can be ordered through a Bosch distributor. The part number for your car is probably 3 437 224 035. Tricky part is adjusting it. Do a search on this forum for "potentiometer" and you will find lots of discussions.


All times are GMT -4. The time now is 06:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website