Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-08-2001, 07:00 PM
Registered User
Join Date: Mar 2001
Location: SF
Posts: 201
Hey Steve, I am troubleshooting my climate control sys. and found that I have no vaccum going to my water valve. I pulled the line and ran the climate control sys.; high temp, low temp, A/C and every mode in between and got nothing in the way of vaccum. I blew into the line and it appears that it isn't broken. The vaccum switching between defrost, vent etc seems to work. It is the temp that is stalled @ hot. What modulates the vaccum to tell it, the water valve, to open? Thanks for your help....
Reply With Quote
Old 04-09-2001, 07:53 AM
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Well, I don't keep this all in memory so I had to wait till I could look it up and be sure.

The water valve vacuum comes from the switchover valve (elctrically operated vacuum switch). It is part of the switchover valve group. Source vacuum (for switching) comes from the engine and I didn't look it up.

The decision to switch vacuum to the heater valve and the electrical control of the switchover valve is done in the pushbutton controller based upon various inputs: evap temp, outside temp, feedback pot, and incar temp.

I would check your source vacuum to the switchover valve group.
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Inductive diesel timing - Stevebfl? Benzmac? Gillybenztech? Thomaspin Tech Help 1 03-26-2003 05:24 PM
Inductive diesel fuel injection timing - Stevebfl? Benzmac? Dan Gillitzer? Thomaspin Diesel Discussion 1 03-26-2003 12:36 PM
stevebfl last question josev Tech Help 1 02-03-2003 04:51 PM
question for stevebfl josev Tech Help 15 01-29-2003 05:22 PM
question for stevebfl or anybody josev Tech Help 8 01-19-2003 05:14 AM

All times are GMT -4. The time now is 04:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page