![]() |
W126, driver door handle removal?
I need to pull mine off to replace that microswitch for the locks.
Obviously the panel has to come off and whatnot, but what am I missing to let it come off the rest of the way? :confused: It's loose but will not come out the rest of the way... |
If it's similar to a W140 door lock, the microswitch should be on the lock mechanism, not on the door handle.
|
Is there anything listed in the Braingears site on where to pop off that microswitch?
|
I don't believe the microswitch is a separate part. It's part of the lock assembly, which is very expensive. (It's $920 for a W140, that I know about).
Make sure the problem is not caused by something simpler, broken wire etc. |
Hrm, I'm almost certain it is the switch. All wiring is intact and all. Vac locks work properly from passenger side (trunk's plastic connector is broken only).
|
All times are GMT -4. The time now is 06:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website