My accelerator pedal ('86 300E) requires 1-2" of depression before it encounters the linkage resistance for throttle movement. In other words, nothing happens for the first inch or so.

Before I begin trying to adjust this slack out of the throttle linkage, would appreciate any suggestions re. how much of this slack is 'normal' and any tips on optimizing idle linkage adjustments? Also, I'm wondering whether component wear is a possibility, or is this condition strictly an adjustment problem?
Thanks for your help, Barrie

Almost all MB's with auto transmissions have this *slack* in the accelerator linkage. Designed to allow trans(control pressure) to have the correct alignment with engine torque.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator