Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-10-2001, 12:35 PM
abouzmm
Guest
 
Posts: n/a
Hello all,
I would like to know if any one has instruction/knows how to change the serpentine belt on my 93 190E 2.6L engine. I can't figure out how to take it out!!
Thanks
Reply With Quote
  #2  
Old 04-10-2001, 02:59 PM
glmoy
Guest
 
Posts: n/a
Loosen the bolt by the pointer, then turn the tension
bolt by the pulley until belt is able to come off. Looking
down it is the little tension assembly between the pulleys
with the small wheel on it.

Gary
Reply With Quote
  #3  
Old 04-11-2001, 12:39 AM
Registered User
 
Join Date: Apr 2000
Location: LEMONT-CHICAGO
Posts: 412
AS glmoy says loosen the big bolt on the tensioner pulley assembley I think its an 18mm. Then you must loosen the top hollow bolt near the water pump to releive the tension. Now that the easy part is over. Take off the fan shroud assembly. Examine Carefully how the belt threads through the pulley system and make sure the belt diagram is still on the car or is available. Be patient, as it will take you a few attempts to get it right. I have done this a few times and start at the crankshaft and thread the belt on the power steering side first and the alternater side second. Once I have it about right pull hard on the belt to stretch it a bit and pop it over the top pulley on the alternater side. Good luck. Have some cold ones on hand for after the job is done.
__________________
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to replace serpentine drive belt ? tseinsf Tech Help 11 07-27-2007 06:40 PM
Serpentine Belt: Designed to leave you stranded? Ron in SC ML, GL, G-Wagen, R-Class, Unimog, Sprinter 7 08-26-2004 03:22 PM
89' 190e Serpentine Belt Diagram akacali Tech Help 1 05-10-2004 05:04 PM
Alternator and serpentine belt install..Success!!! G-Benz Tech Help 8 10-08-2001 06:13 PM
Questions on serpentine belt on 202 (94 C280)... hancheng Tech Help 5 08-16-2001 12:42 PM



All times are GMT -4. The time now is 09:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page