|
Ignition wiring diagram needed
I had the ignition in my 92 300D 2.5T go bad. I went through all the steps to pull the ignition switch with some help from a friend. Well all went well except for one thing. My friend took the electrical connection apart instead of cutting the screws. Now that I’m putting it back together all I have is a bundle of lose wires. I need a diagram or write-up to tell me what order the wires plug into the switch. Can anyone help???
|
1 Attachment(s)
This is semantics but ignition in a Diesel is a byproduct of temperature and pressure, not turning a key in a switch.
The attached image is from the W126 key switch. Might help you decode your W124 key switch. Sixto 93 300SD |
1 Attachment(s)
This should help
|
Thanks for the help, it worked great.
|
To MB DOC- You Rock ! Thank you so much for the help with the wiring diagram.......This site and the people on it are fantastic. I called 3 MB Dealerships over a period of 3 days and no help but you solved my mishap in 1 hour. Forever grateful....Kenn Muzikmakr9 Washington DC USA
|
Thanks very much
The list of where the wires go in the connector is just what I needed. Thanks very much.
|
| All times are GMT -4. The time now is 03:46 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website