|
|
|
|
|
|
|
|
#1
|
|||
|
|||
|
560 sel quit running and won't start
ok here we go one thing after another. was driving at lunch didn't make a mile and car felt like it was chocking and stoped and now won't start. fuel pump is running getting current to the icv if that matters. is this a fuel pump relay problem?
|
|
#2
|
|||
|
|||
|
If the pump is running and fuel is flowing I doubt it is fuel related.
If it were me I would check the crankshaft position sensor...there seem to be quite a few of them going bad lately. I think it is only about $50 and causes the symptoms you describe.
__________________
Marty D. 2013 C300 4Matic 1984 BMW 733i 2013 Lincoln MKz |
|
#3
|
|||
|
|||
|
560sel/no spark
i agree pickup from bell housing they are dropping like flies.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg |
|
#4
|
|||
|
|||
|
For future reference....
1) Where is this sensor located? 2) I don't see "crankshaft sensor" on Fastlane, is it a dealer part? 3) How does this sensor look like? Luckily my car is running fine *knock on wood*, but if I were to have a problem like this, I'd know where to look. |
|
#5
|
||||
|
||||
|
__________________
2012 E350 Bluetech |
|
#6
|
|||
|
|||
|
ok i agree with the otherr guy. this is new to me. i don't know alot about cars so what and where is this located? but i would love for it to solve my problem. at this point i am very frustrated
|
![]() |
| Bookmarks |
|
|