Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #16  
Old 10-20-2006, 05:05 PM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
Quote:
Originally Posted by jhodg5ck View Post
thanks carson, yes, these are tapered..no crush washers etc.. Good to know the 5K ends are correct, although I am a bit suprised based on what i've read in the MB literature regarding their ignition systems.

I'll need to see if I can get an end as they all tested to 4.8-4.9, but one was 5.5 and I'd like to get them all spot on.


What year was the one you were working on? This set is Early..stamped 85 on the head.

Jonathan
the engine originally was aeuro model, but the block was damaged byond repair, it was rebuilt using a bored out california emissions block, it was later than 1985, where would you get those ends? seems as though they were only specific to that motor,, after the rebuild the engine had a severe pinging issue, i believe the compression ratio was way too high,, what octane fuel do you use?

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page