Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-23-2001, 07:32 PM
benzat
Guest
 
Posts: n/a
if I have the upper contorl arms changed and the sway bar bushings do I have to have the car alignment redone also?

benzat

1982 380 SEC
Reply With Quote
  #2  
Old 04-23-2001, 08:24 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,777
you will want

to get it aligned anytime you do front suspension work like you describe.
Jim
'85 300D
'95 E320
'97 CRV
Reply With Quote
  #3  
Old 04-23-2001, 09:11 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Yes.
Most cars are aligned more frequently than the parts are replaced. So, you may have had an alignment with the worn upper or lower arms. In that case, the new ones will be a different measure.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote
  #4  
Old 04-24-2001, 07:46 AM
benzat
Guest
 
Posts: n/a
thank you very much

benzat
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hurricane advise..... Plantman Off-Topic Discussion 37 09-05-2004 11:31 AM
Advise on a 1984 300SD braverichard Diesel Discussion 10 04-03-2004 01:19 PM
Front end clunk - advise needed mikaelw2001 Tech Help 5 08-14-2003 10:41 AM
'77 450 sel: Fuel System question: Steve or Benzmac, please cincuenton Tech Help 2 06-11-2003 12:05 AM
YIIIIIPEEEEE Benzmac serviced my car……BUT Tolahouse Tech Help 8 01-02-2001 11:50 PM



All times are GMT -4. The time now is 05:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page