|
|
|
#1
|
|||
|
|||
Blower Motor Works Perfect With Engine Off
OK, Here's one for you guys.
My 1990 300e's blower motor works fine until I start the engine then it seems to have a mind of it's own. With the engine off I can controll the speed , with the engine running it goes to low. Sometimes it will run where it's set(high) for awhile then drop to low after say 40mph. I've done the CCU solder joints repair, and even traded out the CCU with the 260e and no change. Any Thoughts at what might be causing this, Is there a vacume control aspect?
__________________
88 260E 92K 90 300E 143K 97 Suburban 2500 154K 98 Chevy 3500 155K 65 John Deere 3020 ? |
#2
|
|||
|
|||
I once had a problem with an erratic blower motor on a 124.
It turned out to be the connector that plugs into the firewall up near the expansion valve.
__________________
2012 E350 2006 Callaway SC560 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|