190 2.6 Electrical Reset
 

I just finished replacing the head gasket on a 91 190 2.6. All connectors, vac lines, etc are in place, BUT there's no electrical power to anywhere! No brake lights, nothing. Battery is good, plenty of amps. Is there a master reset/fuse somewhere?

Volts
 

Check the earth lead from the battery. This leads from the battery to the body of the car. This is the first place to look if there is no power ANYWHERE. There is no master fuse as such.

Thx - That at least gives me a place to start snooping. My concern was that there was a master fuse or something that needed a reset.