|
|
|
#1
|
|||
|
|||
Track Rod Bushings !!!
Hi, i gonna replace both track rod bushings on my -82 300TDT, somewhere
i read about a repair kit for the bushings but i cant find anything about this anymore, that kit was for if the holes or something like that was out of round and the kit contained bolts and looked like 1 or 2 large rings and some other hardware for the bushings to the rear mounts. I got hold of 2 bushings who looke about the same but without the 3 holes for bolting the threaded part have a hex close to the bushing, i think this are for my W123 but i need this repair kit to mount these, Sorry for my English Regards Kjell Jonsson from Sweden. PS here is a picture on one of the bushings, 123 or ????????? Last edited by tjolle62; 12-05-2006 at 07:02 PM. |
#2
|
|||
|
|||
__________________
2007 C 230 Sport. |
#3
|
|||
|
|||
Bushing
No , they are for the control arm , these are for the rod from controlarm to chassi.
|
#4
|
|||
|
|||
__________________
Tjohn 82 300 SD 77 450 SL (gone) |
#5
|
|||
|
|||
Bushing........
Ohyes, thats the complete mount but that damn thing i got it's the innerpart
on that mount (the joint itself ). For many years ago that kit was aviable in europe that contained two halfes with rubber inside and when you put that thing i have together you got a complete track rod mount. Thanks for answer from Sweden. |
Bookmarks |
|
|