Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-20-2006, 02:34 PM
Registered User
 
Join Date: Oct 2006
Posts: 25
1986 420SEL Maintenance Questions

Hi all,

Plan to do some maintenance on my car next week. Vehicle has 90,000 miles. The car runs okay. Just trying to prevent major problems. Plan on replacing s. plugs, timing chain or guides or tensioner, Drive shaft flex joints, belts, front and rear brakes. Have some questions:
  • Timing Chain: Do I just replace the upper guides or do I need to also change the tensioner and chain?
  • What are the best plugs. Platinum or nickel?
  • Best source for quality parts?
Thanks, and have a great holiday season

Joe

Reply With Quote
  #2  
Old 12-20-2006, 08:51 PM
420benz's Avatar
Registered User
 
Join Date: Jul 2001
Posts: 961
Quote:
Originally Posted by jodeven View Post
Hi all,

Plan to do some maintenance on my car next week. Vehicle has 90,000 miles. The car runs okay. Just trying to prevent major problems. Plan on replacing s. plugs, timing chain or guides or tensioner, Drive shaft flex joints, belts, front and rear brakes. Have some questions:
  • Timing Chain: Do I just replace the upper guides or do I need to also change the tensioner and chain?
  • What are the best plugs. Platinum or nickel?
  • Best source for quality parts?
Thanks, and have a great holiday season

Joe
I would replace the chain, guides and the tensioner.
Ibuy all my parts from Phil found on this site.
Reply With Quote
  #3  
Old 12-20-2006, 10:25 PM
Hatterasguy's Avatar
Zero
 
Join Date: Nov 2002
Location: Milford, CT
Posts: 19,318
The best plugs are, Bosch copper non resister.
__________________
1999 SL500
1969 280SE
2023 Ram 1500
2007 Tiara 3200
Reply With Quote
  #4  
Old 12-20-2006, 10:26 PM
jhodg5ck's Avatar
Registered User
 
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 1,405
Quote:
Originally Posted by jodeven View Post
Hi all,

Plan to do some maintenance on my car next week. Vehicle has 90,000 miles. The car runs okay. Just trying to prevent major problems. Plan on replacing s. plugs, timing chain or guides or tensioner, Drive shaft flex joints, belts, front and rear brakes. Have some questions:
  • Timing Chain: Do I just replace the upper guides or do I need to also change the tensioner and chain?
  • What are the best plugs. Platinum or nickel?
  • Best source for quality parts?
Thanks, and have a great holiday season

Joe
Chain, tensioner, all upper rails (4 in total). Oil tube clips and VC'er gaskets.
Contitechs for belts is all I use.
Platinum is a big NO. Copper is what you want, and the BIGGEST concern is that the are non resistor! Beru and NGk are you best bet for NR plugs @ this point, you can basically write Bosch off now.
I'd also look at your dist. cap and rotor. I'd also test all your wires, make sure none have more then 1.1-1.3 Kohms resistance.

There are many places to get parts, just be sure who ever you are buying from has experience working with/on your style car.

Jonathan
__________________
Blue Ridge Mercedes
Jonathan Hodgman
http://www.blueridgemb.com/
Enthusiast Service, Restoration & Tuning.
Follow Us on Facebook!
Located in the Atlanta area
Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines.
Mercedes Repair Atlanta
Reply With Quote
  #5  
Old 12-21-2006, 02:29 PM
Registered User
 
Join Date: Oct 2006
Posts: 25
Why is platinum a big no and Bosch no good

Quote:
Originally Posted by jhodg5ck View Post
Chain, tensioner, all upper rails (4 in total). Oil tube clips and VC'er gaskets.
Contitechs for belts is all I use.
Platinum is a big NO. Copper is what you want, and the BIGGEST concern is that the are non resistor! Beru and NGk are you best bet for NR plugs @ this point, you can basically write Bosch off now.
I'd also look at your dist. cap and rotor. I'd also test all your wires, make sure none have more then 1.1-1.3 Kohms resistance.

There are many places to get parts, just be sure who ever you are buying from has experience working with/on your style car.

Jonathan

Why is platinum a big no and bosch no good? What is the 4th rail. I am aware of 3 near the top. Is the 4th at the chain tensioner?

Thanks

Joe
Reply With Quote
  #6  
Old 12-21-2006, 02:36 PM
jhodg5ck's Avatar
Registered User
 
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 1,405
All the platinum plugs are resistor which MB states in their literature as NG. Also, the plat. plugs have Very small electrodes thus the can become contaminated quite easily. The resistor plugs also cut down on spark output/energy.
Bosch has stopped making non resistor plugs for our cars...

Yes, the 4th rail is @ the tensioner.

Jonathan
__________________
Blue Ridge Mercedes
Jonathan Hodgman
http://www.blueridgemb.com/
Enthusiast Service, Restoration & Tuning.
Follow Us on Facebook!
Located in the Atlanta area
Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines.
Mercedes Repair Atlanta
Reply With Quote
  #7  
Old 12-21-2006, 03:19 PM
Registered User
 
Join Date: Sep 2006
Posts: 9
Confused about Resistor/Non Resistor

What happens if you run resistor plugs in the car? My mechanic and parts guys say resistor plugs are only needed to reduce electrical system noise that can interfere with radio reception, etc. on that advice, i'm running resistor copper bosch plugs in my 91 560SEL with no problems. PO had Bosch Platinums installed, and I can vouch they are terrible.
Reply With Quote
  #8  
Old 12-21-2006, 03:55 PM
Old School Mechanic
 
Join Date: Dec 2006
Location: Auburn California
Posts: 127
Check out this thread:
Bosch Platinum +4 Spark Plug Experienced..?
Reply With Quote
  #9  
Old 12-21-2006, 04:05 PM
Old School Mechanic
 
Join Date: Dec 2006
Location: Auburn California
Posts: 127
Sorry the search engine here didn't turn up the title??!! Search on the author: J Irwan

That got me back there.
Reply With Quote
  #10  
Old 12-21-2006, 04:54 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
In your engine, the resistance is in the spark plug wire boot, not the spark plug itself.

If you use a resistor plug (all platinums are resistor plugs), you are doubling the resistance, which is hurting the spark.

Just install regular copper core non-resistor plugs. They are cheap. Your car will run perfectly, and you need to change them every 30,000 miles.
__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
  #11  
Old 12-21-2006, 04:58 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
Some time ago a Mercedes-Benz service bulletin recommended against using fine single-wire platinum electrode spark plugs in their engines. The electrode on these plugs was so thin that the spark could be blown off the plug, causing misfires. Thin-wire plugs could cause poor idle quality and misfires at high rpm under full throttle.
__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
  #12  
Old 12-21-2006, 04:59 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
Also a lot of good info in this thread:

Replaced Spark Plugs...and wow!! what a difference!
__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
  #13  
Old 12-22-2006, 04:13 PM
Registered User
 
Join Date: Oct 2006
Posts: 25
Thanks

Thanks all for the help.

I have a box full of parts and will be working on the car the week after Christmas. I don't have to go back to work until Jan 3rd. So will be taking my time, not having time pressure. Should be enjoyable.

Joe
Reply With Quote
  #14  
Old 12-22-2006, 05:53 PM
Strife's Avatar
General Purpose Geek
 
Join Date: Apr 2004
Location: KY USA
Posts: 2,238
Quote:
Originally Posted by suginami View Post
In your engine, the resistance is in the spark plug wire boot, not the spark plug itself.

If you use a resistor plug (all platinums are resistor plugs), you are doubling the resistance, which is hurting the spark.

Just install regular copper core non-resistor plugs. They are cheap. Your car will run perfectly, and you need to change them every 30,000 miles.
Do you know where to find replacements for Bosch non-resistor plugs? Like the W9DC/w9DC0? TIA.
__________________
86 560SL
With homebrew first gear start!
85 380SL
Daily Driver Project

http://juliepalooza.8m.com/sl/mercedes.htm
Reply With Quote
  #15  
Old 12-22-2006, 08:58 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
Quote:
Originally Posted by Strife View Post
Do you know where to find replacements for Bosch non-resistor plugs? Like the W9DC/w9DC0? TIA.
You can try Phil here at ShopForum. Click on the Buy Parts link at the top of the page.

__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page