Can I install a manual tranny from a 1985 190e into a w126 1982 380se? What parts would I need from the 190, what additional parts would I require? Thanks in advance
|
Wrong bellhousing is one problem, flywheel & clutch are another. The V8 parts are bigger than the 4-cyl & 6-cyl parts. Also, the v8 trannys have beefed up bearings.
You can probably use the 4-cyl parts on a comparable 6 w/o trouble. Somewhere around there, they changed the tranny-engine mounting to be on a slant. Eyeball the parts. -CTH |
All times are GMT -4. The time now is 10:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website