Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-24-2007, 12:58 AM
Registered User
 
Join Date: Oct 2004
Location: Brisbane, Australia
Posts: 177
W126 - What is this Hose

Can any member help with identifying one of the rubber hoses on a 500/560SEL? Looking from the front of the engine. On the left bank below the air cleaner is the air intake rail for the left hand fuel injectors. (Yellow plug at both ends with four injector connectors) Running off a yellow junction joiner in the centre is a black rubber hose of the same diameter that exits for an inch before bending at about a 40 degree angle towards the rear of the engine to dissapear under and connect to the underside of the Fuel injection assembly. Merc Dealership does not list this part and has supplied all other hoses. I can't find a part number on the old hose. It was rubber in its former life, however has now turned to something resembling plastic or steel!
I don't want to remove it as it will break and am terrified what brittle part it may connect to under the injection assembly. Any help wiith what this part is called or a part number would be appreciated. What does this hose connect to under the injector assembly? Is it a metal connection or another scarey old brittle rubber connection. Just need to know if it can be removed without breaking what its connected to. Any information or advice would be appreciated.

Reply With Quote
  #2  
Old 01-24-2007, 06:30 PM
Registered User
 
Join Date: Oct 2004
Location: Brisbane, Australia
Posts: 177
Quote:
Originally Posted by mbtechman View Post
there air distabrtion hoses , yes they get hard and break it best to get factory one , i got some aftermarket ones before and they sucked shut at idle.you can get the caps too.
I contacted Mercedes Benz with the "Air distribution hose", they stated that all hoses are under that catogory as you stated, however needed either a specific merc title for the part or its actual part number. Their schematics clearly show the right bank hoses, however only the air rail on the left obscured by the fuel injection assembly hiding this part. You wouldm't have the receipt for the one you replaced? It would have the part number! Thanks for your help to date.
Brian.
280SL
500SEL
Reply With Quote
  #3  
Old 01-25-2007, 10:28 AM
david s poole
 
Join Date: Mar 2005
Location: dallas
Posts: 1,822
your y hose number is 116-090-08-82.it used to be available as two pcs but now only as one pce.it comes off the idle air plenum which is fed by the idle valve and feeds air to both of the long tubes,it doesn't connect under the fuel distribution plenum,so you can feel safe about removing it.

__________________
David S Poole
European Performance
Dallas, TX
4696880422

"Fortune favors the prepared mind"
1987 Mercedes Benz 420SEL
1988 Mercedes Benz 300TE (With new evaporator)
2000 Mercedes Benz C280
http://www.w108.org/gallery/albums/A...1159.thumb.jpg
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page