|
|
|
#1
|
|||
|
|||
1992 400se Wires Help
Hello
I Noticed Today That Behind The Dashboared ,there Is A Little Black Box In My 1992 Mercedes Benz 400se, This Box Will Peep When You Put The Key In The Ignition ,or If You Leave The Key In ,or Lights On ,ect ,there Is 7 Wires Are Not Hooked Up To It ,i Have Numbers On The Box ,but There Is Not Numbers On The Wires ,only Colors ,please I Need Some Help To Hook Them Up To The Box ,thank You . |
#2
|
|||
|
|||
Wires
I suspect you are looking at an aftermarket device since a factory device would have a made to fit connector.
By connecting this device you may create problems such as No start,horns or sirens or lock out. Is there a part number on the black box? Mike |
#3
|
|||
|
|||
there is more than one number on the part
5 sa005035-01 0125456832 |
#4
|
|||
|
|||
any clue guys?
|
#5
|
|||
|
|||
This is Seat Belt/Keys/Lights Warning Module N2/4
1 - Brown/Green 2 - Pink/Blue 3 - Grey/Purple (2 wires) 4 - empty 5 - Brown/Grey 6 - Black/Red/Purple 7 - Brown/Blue 8 - Brown |
#6
|
|||
|
|||
thank you much ,i am ganna go and try that now
|
#7
|
|||
|
|||
thanks ,it worked, like seat belt,lights worked ,but i have a problem now ,my radio is not working ,it wont turn on ,and also when i open the driver door ,the light wont come one ,but if i open other doors ,the light will go on ,also i noticed one of the fuses was burned ,i changed it ,this is when the seat belt and other lights came on ,thanks for the help ,but if you could please find out why the radio ,and the light not working ,thanks again
|
#8
|
|||
|
|||
Well, it was disconnected for a reason I believe. Check fuses 9, 22, and 24. All these fuses are in the different circuits for module N2/4
|
#9
|
||||
|
||||
Can you provide "photos" of this little "box" and its wiring?
|
#10
|
|||
|
|||
the box was not disconnected befor ,i did that by mistake ,and i could not fiquer it out ,radio does not work now ,when i open driver's door the inside light wont go on ,but if i open any other doors it will ,warning lights in dash are working ,fues # 24 was burned ,i changed it ,all other fuses are looking good
here is some pictures of the box ,i am hoping to get some help ,thanks guys |
#11
|
|||
|
|||
help help please
|
#12
|
|||
|
|||
still waiting for help please
|
#13
|
|||
|
|||
ANY HELP GUYS ,PLEASE
|
#14
|
|||
|
|||
I Have Checked All The Fuses ,both Boxes ,they Are Good ,wires Looks Good ,but It Seems There Is No Power Going To The Radio At All ,i Checked The Fuses For The Radio And The Amp ,if I Leave The Key In Ignition ,the Device Don't Peep,when I Open Driver's Door ,the Light Don't Turn On ,but If I Open Any Other Door ,the Light Will Go On ,if I Leave The Head Lights On And Take The Key Out ,the Device Don't Peep Either ,it Seems Like One Related Problem For All Of Them ,not Sure What It Is , I Really Need Some Help With That ,thank You All .
|
#15
|
|||
|
|||
400Se CLASS PROBLEM
AS you see below ,and what Mike Freeman said , i have a problem now with the horn ,right brake light is not working , oil pressure reader is not working, and heat /ac not working also ,again this is what mike said ((I suspect you are looking at an aftermarket device since a factory device would have a made to fit connector.
By connecting this device you may create problems such as No start,horns or sirens or lock out. Is there a part number on the black box? i think i made this problem ,now what is going on? any one knows ,thanks . |
Bookmarks |
|
|