|
|
|
#1
|
|||
|
|||
Help With Installing "UNIVERSAL" Vacuum Pump W140
1992 400SE.
I recieved my new BOSH OEM vacuum pump. While ordering it, there was this blurb on what additional parts were needed: "Up to chassis number A-216190, requires (2) 210 800 02 22 vacuum coupling, (2) 210 800 04 22 vacuum coupling, (1) 000 987 11 45 plug and (1) 007 997 61 82 vacuum hose. For vehicles with electric headrests, (2) 124 805 02 44 vacuum plug is required. For vehicles without reversing aid, (1) 210 800 00 53 cap is required." So after buying all the special order vacuum couplings, plugs, and hose, (except for the reversing aid cap), I can't figure out where and how to connect each vauum line. Currently I have 15 hoses connected to the original pump which had a nice adapter, unfortunatly it is incompatible with the new pump. Currently: 6 Yellow connect to ZV 2 Red connect to RH 1 Black to SFG 2 White/Blue to FKS 1 Clear to PU 3 Grey to PU (with 2 dots over the U) The 2 vacuum couplings I bought are 3-ways, and the other 2 vacuum couplings are also 3-way (just different style), remaining I have 3 plugs and vacuum hose. How do I accomodate the 6 hoses to ZV and 3 to PU (with 2 dots over the U) to fit the new pump? Any ideas, diagrams, or previous experience would be apprechiated. Thanks. Last edited by slimak9; 02-11-2007 at 01:39 PM. |
#2
|
|||
|
|||
You need a six way distributor, remove ends from six yellow lines and attach to connector, output of connector is connected to the socket via a 12' piece of tubing and slide on the CV port
The two red hoses will be treated the same way with a "two way"another pice of tubing and a "socket" to RH The black line (RTG) with another socket to SFG The clear line (MVA) with another socket to P- or Pu Vehicles without RHR can cap FKS otherwise the white lines to a "two way" and onto FKS Orthopedic will need another six way and the three go to that, and the remaining ports are capped, another 12" and a socket P+ The six ways are pushed over the studs. You need one or two "six ways" 210 800 03 22, (one) since you have a three way (not shown on my instructions), with orthopedic you need 4 sockets, total, back up assist and head rest needs "two way" 210 800 04 22 but should have ends on it. your seller should have included the bulletin MBNA 80/5 You could make something work |
#3
|
|||
|
|||
Thanks a lot, the part # for that 6-way is just what I needed.
MB was having a difficult time finding it. *********************** did not include any bulliten. Although if you have it handy, I wouldn't mind reading it. Thanks again. |
#4
|
|||
|
|||
I will try and scan and attach, when I get a chance. Im glad it worked out for you. PS the MB dealer should have the bulletin, how are they installing the new pump?
|
#5
|
|||
|
|||
When I went to order the 6-way, I asked them about this bulliten, and their reply at the Parts desk was, "I have no idea what this is." Maybe I should have asked at the Service desk.
Thanks. |
#6
|
||||
|
||||
140 pump
came across this pdf file, it may help you
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins |
#7
|
|||
|
|||
Fantastic...I was able to install the new pump, and find a leak which was in a manifold under the front passenger floor mat. This was the cause of the old pump burning out. (It really smelt awful).
When buying these new pumps, the above part number for the 6-way is key to this installation. Thanks for your help. |
#8
|
|||
|
|||
The parts guys can be such idiots, I am glad you got it to work. The pump runs to provide pressure and vacuum to reservoirs, if you have a leak it will cause it to run quite a bit. The bulletin is very similar to (the one I could not send)
|
#9
|
||||
|
||||
where did you buy the couplings?? thnxs
__________________
1993 500SEL |
#10
|
||||
|
||||
does anyone have a sketch that shows how all this connects with newer pump for 1993 sel500
__________________
1993 500SEL |
#11
|
|||
|
|||
see pdf above
|
#12
|
||||
|
||||
Central locking; late version, may require 6x couplings #202 800 02 53; models w/ adjustable headrest add 2x #124 805 02 44; models w/o reversing aid add 1x #210 800 00 53
i am buying a new pump and this is whats recommended for couplings by seller? do i need more? your list above shows more couplings. the pdf doesnt help much, is there a sketch showing how to hook up all these couplings..
__________________
1993 500SEL |
Bookmarks |
|
|