Did you ever find a rebuilder for the EZL unit? I have 1987 560SL with symptoms of faulty EXL... no start condition. Was starting from complete cold, then stalling when reaching operating temp. It would then restart after sitting for hours and completely cold again. I now have a no start condition.... period.

$29.99 from china. 30 year newer tech. say your old aluminum box for the showcase.

I had that with my 300-24. It was a Bremi rotor arm. Replaced it with the 19 year old original and all was well. Replaced that with a new MB rotor.

I suppose the "no start" could indicate dead EZL but I've never had that. As discussed in PMs, get a spare!!!

R

I used a sheet of plastic type film i removed from inside the screen of an old lap top computer cut to fit the rear of the EZL along with heat sink paste from Maplins sorry to say that Maplins is no longer with us in UK And for other members reading this post .Please pick UP another EZL as a spare these EZLs are costing an arm and a leg over in the UK with prices going up every day .