E320 98 sunroof (cables)
 

A new member PM'd me a question that I don't know the answer to... so... anybody want to lend him a hand?
Here is his profile:
http://www.peachparts.com/shopforum/members/frank-nc-e320.html

Thanks,

http://www.peachparts.com/shopforum/tech-help/125230-98-e300td-sunroof.html#post1173461

This thread goes into some detail and gives the PN for the guides.

the guides are not meant to utilize both screw holes. However, it seems that you can do that. The reason for the two holes is MB only has to stock one part that will work on either side. Once the cables are kinked, you have to replace them, no getting around it. Sounds like something is jamming, make sure you remove the lift rails, and clean and relube the teflon pads, or replace if worn. I did this exact project last year.

Thanks guys.
 

Frank's problem was resolved with a new/used sunroof...