94 C280 engine turning question
 

Hi all,

I'd like to turn the engine to position the torque converter drain plug. What size is the bolt? I can feel it when underneath the car but can feel it...

thanks...

27 mm according to this for a C230. Your unit may be similar:

http://www.dezinetech.org/w202/

thanks...
 

I'll try that...

You can also turn the converetr with a piece of wood as a lever through the inspection plate hole. Just a little at a time .. I see some use a large screw-driver, but that will dent the converter, the wood won't...
...the drain plug on that chassis requires a 5 mm hex head/allen