Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-27-2007, 07:56 PM
Registered User
 
Join Date: Mar 2007
Posts: 56
Blue Cam in ignition switch

Well after replacing the whole ignition lock housing, tumbler and switch, would not shift out of park. MBDOC suggested the blue cam that goes in between the housing and switch. Well I just knew for sure that it would come installed on a new one, WRONG.

So I am trying to put the cam back in, it will go in a certain way, but once you put the tumbler in it will just not line up. If I put the cam in and then the tumbler the tumbler will not go in all the way. HELP

I need to know if there is a trick to installing the cam.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page