Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-29-2007, 09:55 AM
Registered User
 
Join Date: Apr 2007
Posts: 1
300E vacuum modulator replacement

How to remove the transmission vacuum modulator on 90 300E.

Last edited by winstonbenz; 04-29-2007 at 10:31 AM. Reason: mis worded
Reply With Quote
  #2  
Old 04-30-2007, 10:24 AM
Sev's Avatar
Sev Sev is offline
Infractions: 99/99 (999)
 
Join Date: Apr 2007
Posts: 1,443
you have to disconnect the trans from the drive shaft, and remove the cross member. unbolt the exhaust manifold from the downpipes so the exhaust will drop down a bit. jack up the engine from only the front post near the distributor cap with an engine hoist so the back of the trans points downward. now just unplug the vacuum tube from the intake manifold, and replace the modulator. it's not a diy job unless you've got some skills. it took my mechanic about 3 hours to do it, and cost me $235, and I supplied him with the new vacuum modulator which cost me $65.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page