Do any of you blokes out there know how to do the kind of dent repair that they advertise as "paintless dent repair"? It's the art of re-shaping the sheet metal without damaging the paint in order to smooth out those little bumps and dings. If you know of a web site that gives us a primer (no pun intended) on the subject then that would be way cool too. Thanks in advance.
Thom |
just type paintless dent repair into search engine "google"
and you will get dozens of sites on the subject . Most of them are selling the equiptment and courses on how to do it and how you can make three million dollars a day doing it but you can gleam some info from these sites....... William Rogers..... |
I was doing a search on the subject just like you a couple of months ago so I could fix 2 small dings.
I found a forum with a good general view of the process, click here to get there. Good luck. |
All times are GMT -4. The time now is 11:43 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website