|
|
|
#1
|
||||
|
||||
pse unit requires programming?
I have to change the PSE pump on the 00 E430. The dealer is asking for $190 just for initial diagnostics and then labor / parts extra comes later !
I already know it's the PSE pump. I have taken it apart as well. Not an issue. Just wanted to know if the new part will be a simply plug and play or would any other modules or the PSE itself require programming to work the the car. thnx in advance.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#2
|
||||
|
||||
according to the mercedes parts guide, it does require programming during installation. footnote 423
just insist they replace the pump, without diag, obviously you are taking it knowing by your own diag it is the pump 210-800-27-48
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins |
#3
|
||||
|
||||
good idea. i'll call and check if the dealership will change without charging diagnostics. somehow i dont see that happening.
how much is involved in programming the unit ? do we need to have the mercedes software for it ?
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#4
|
||||
|
||||
programming needs to be done with a mercedes factory tool, is there an independent mercedes shop near you? many have the tool and can do the programming, i have it if you are near san diego
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins |
#5
|
||||
|
||||
thanks very much for the replies and once again for the offer. i'm however, in NJ so
will keep you posted on how it went once I get the time to go and get this done. the PSE is operational to the point where the doors do lock, it's only the stupid trunk that wont unlock either with the key remote or the inside button ever since the PSE was soaked with water. I tried drying it, de-oxidizing it and everything. for now i'll simply lock/unlock the trunk with the key P.S. is there a way to have a regular key made for the w210 series ? there's this small key blade in the key but I'd rather have the regular key for the frequent opening of the trunk now...
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#6
|
||||
|
||||
does your main key not have the metal blade?
the "emergency" key blade is available mb# 208-766-17-06
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins |
Bookmarks |
|
|