Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-24-2007, 03:39 AM
Registered User
 
Join Date: Jul 2004
Location: Houston, TX
Posts: 36
Airbag replacement?

Hi,

Thanks for clicking on my posting.

I have a 2005 211, I am having to replace the airbags, drivers sided and passenger, seatbelts. Do I need to replace the module or can I reset it using star diagnosis?

someone told me that the module can be reset, but someone also told me that the new airbags may deploy again if I do not replace the module???

Your help would be greatly appreciated.

Thanks
Mehdi

Reply With Quote
  #2  
Old 05-24-2007, 08:02 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The SRS control unit "design" is that after 3 different deployments the control unit must be replaced.

However if you get code B1000 with your scanner it will require replacement.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 05-25-2007, 03:09 AM
Registered User
 
Join Date: Jul 2004
Location: Houston, TX
Posts: 36
Re:

Hi,

Thanks for your prompt reply.

One 1 deployment has occured, although both the front air bags deployed and 4 seat belts are stuck. In this case is this considered as one incident?? ie the module can be reset???

How about the error B1000?? can I scan this with SDS DAS or any regular scanner will give me the code B1000?? how about resetting it?? is SDS required or can a regular scanner do it.

BTW, since you are so experienced on the MB, may I ask you one more question? on a 2001 SLK, the tranmission is not shifting from 1 to any other gear? what could be wrong?? what should I check?? also when the gas pedal is released, a rattling noise is observed from the bottom of the vehicle? any suggestions???

Thanks & Regards
Mehdi

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page