PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Engine Mount - what are they (http://www.peachparts.com/shopforum/tech-help/19042-engine-mount-what-they.html)

Michael Tse 06-07-2001 10:32 PM

Hi all,

My car has a bit of vibrating on idle and I took it to the dealer and they said the engine mount is on the way out. It probably can still last for a year.

The vibration only happen in forward gear and idle but not reserve.

The dealer think it will take 4 hours to do and cost quite a bit of money.

What are engine mount and why are they so expensive. I thought they are just some rubber to support the engine!

Regards,
Michael Tse
Australia

jeffsr 06-07-2001 10:43 PM

What car, what engine, what year? what mileage????

Michael Tse 06-07-2001 10:50 PM

It is a W140 1993 S500.

G-Benz 06-08-2001 10:06 AM

Without being too technical, the engine mounts are the four points of the engine that are connected to the chassis of the car.

If they were mounted solidly (as in race cars, which have solid metal mounts) all of the engine's rotational vibrations would be transferred to the body, resulting in a very uncomfortable ride.

The engine mounts for passenger vehicles are made of a compliant rubber compound (such as urethane, I'm being generic here), and act like shock absorbers to dampen the vibrations.

When they get old and brittle, they either stiffen up, or break. As they stiffen, the dampening properties are lost, resulting on more vibrations transferred to the vehicle. If one or more of them break, then the engine is free to move about the broken points, resulting in "clunky" sounds when changing gears, or tromping on the accelerator.

I don't know how they are mounted on your particular model, but the process usually involves loosening the motor mounts and raising the engine via a lift, allowing access to the motor mounts for replacement. For what it takes, it's best to have them all replaced, like you would with shocks brakes and tires.

It's not a job for the timid, and you run the risk of having an engine fall on top of you if it's not supported properly.

I've only replaced the mounts on my VW engine, but it was out of the car at the time anyway, so I am not sure of the absolute procedure for MBs.

Perhaps the more experienced mechanics on this forum can give you more insight as to whether the cost and expense you were quoted is valid...Good Luck!


All times are GMT -4. The time now is 08:22 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website