I have been looking around and have not found anything I like. My wife always takes a frozen water bottle (20oz) and she would like to have a cup holder for it.

Does anyone have any suggestions?

TIA


David

__________________
Sent from an agnostic abacus

2014 C250 21,XXX my new DD ** 2013 GLK 350 18,000 Wife's new DD**

- With out god, life is everything.
- God is an ever receding pocket of scientific ignorance that's getting smaller and smaller as time moves on..." Neil DeGrasse Tyson
- You can pray for me, I'll think for you.
- When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.

Bump.

Anyone?

__________________
Sent from an agnostic abacus

2014 C250 21,XXX my new DD ** 2013 GLK 350 18,000 Wife's new DD**

- With out god, life is everything.
- God is an ever receding pocket of scientific ignorance that's getting smaller and smaller as time moves on..." Neil DeGrasse Tyson
- You can pray for me, I'll think for you.
- When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.

Check this out!
http://cgi.ebay.com/ebaymotors/MERCEDES-BENZ-Drink-Cup-Holder-CLK-SLK-C230-4Matic-AMG_W0QQitemZ170124896711QQihZ007QQcategoryZ63691QQrdZ1QQcmdZViewItem

__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011

---------------------------------------------------------
1989 300CE - R.I.P. Dec 29 2007
Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE

8 screws = 8 opportunities to hit a wire or interfere with the window or door mechanism.

Cheaper to buy two 12oz bottles and park one elsewhere while the first is consumed. Plus, she'll have 24oz rather than "only" 20oz.

__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)

The one depicted in Texholdem's post is pretty much the only mass-produced cup holder I've seen produced for the W124...and there are a number of sources for it.

Beyond that, you can custom fab one yourself. Personally, I stuff my drinks in the console, and slide the door against the cup to hold it.

__________________
2009 ML350 (106K) - Family vehicle
2001 CLK430 Cabriolet (80K) - Wife's car
2005 BMW 645CI (138K) - My daily driver
2016 Mustang (32K) - Daughter's car

Yeah, cup holder is quite an issue for German cars in general. I've been living there for a long time and it seems to me like a cultural matter. Germans do not tend to eat and trink a lot while driving.
I always had German cars over there: a Beetle, 3 Opel Record, 2 Audi, a BMW 633CSi, 3 MB but cannot remember ever having a decent cup holder.

I recall a time even in movie theaters there were no cup holders at the seats like in the USA. You yourselves are the cup holders .
Perhaps they are catching up with the Amis (German abbrev. for Americans) now.

__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011

---------------------------------------------------------
1989 300CE - R.I.P. Dec 29 2007
Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE

I had the same problem with my 1989 300E! Consider the following:

Another post suggested going down to the local auto parts store and buying a cheapie plastic cup holder ($2-$3) that was designed to hang from the driver's window. It would have a plastic extention on it with a hook! Break off the hook but leave the plastic extention on it. Slip the extention between the carpet and the transmission housing just in front of the driver's (or passenger's)seat. The cup should rest on the floor and is held in place by the extention wedged into the transmission housing. Works great! Holds even large Gatoraid bottle without a problem and does not interfere with my leg or driving position. Just a thought!

Could you post a picture?

__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011

---------------------------------------------------------
1989 300CE - R.I.P. Dec 29 2007
Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE

I like Dogs idea. I'll have to check out the auto places and see if I see something I like.

My goal is not to drill holes that can not be hidden at some point if/wen we sell the car. Hence my dislike for the screw onto the door panel thing. I'd like to find one that attaches to the ac vent (I thought I saw those somewhere) but I cannot seem to find something that seems like it would work.

__________________
Sent from an agnostic abacus

2014 C250 21,XXX my new DD ** 2013 GLK 350 18,000 Wife's new DD**

- With out god, life is everything.
- God is an ever receding pocket of scientific ignorance that's getting smaller and smaller as time moves on..." Neil DeGrasse Tyson
- You can pray for me, I'll think for you.
- When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.

I have two of these units installed in my 95 E330D. I bought them at Wal-Mart a couple of years ago. They are very well made. HOWEVER, I didn't install them on the door, but rather installed one on each side of the gear-shift console. I drilled through the vertical part of the carpet, so there will not be any visible holes left if I ever remove them. Installed them using only 3 screws. I also find these locations to very convenient, much more so then having them on the door.

They served me very well for the last two years.

__________________
'95 E300 Diesel, 264,000 Miles. [Sold it]

I found this one on ebay a few years ago for my '86 300E, it matches my palomino interior exactly. It pops in the console tray and can be removed easily. The "handcuff" arms are adjustable and it includes a tissue holder. I have never seen another one like it. There are no labels or part numbers so I have no idea who makes it. Check out the photos and maybe somebody out there has more info.

My 300E has a five speed manual trans so I included a photo for those have have never seen one.

Attached Thumbnails

     

I like your cup holder, especially with the tissue holder. The question remains where to buy it . What did you pay for it?

__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011

---------------------------------------------------------
1989 300CE - R.I.P. Dec 29 2007
Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE

Hi Tex, I stumbled upon it on ebay, paid around $25 for it, it was used but perfect. The seller said it was in his car when he bought it from a previous owner so he has no info either.

865sp300e,

I also did a search on ebay but found nothing similar. Guess I have to go with the other one.

Thanks

__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011

---------------------------------------------------------
1989 300CE - R.I.P. Dec 29 2007
Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE

I bought one similar to that one, except more expensive, because it was a burlwood one to match the car's wood. I cut a cork template for the bottom of it, for when it was in use and would recommend doing that..

Having had it for 10 years, I can say it is awkward if you are right handed, and note they are NOT adjustable for different sized cups. The common 16 oz plastic water bottles fit right into them.

It is true that Mercedes Benz resisted the cupholders in their cars until they couldn't resist the pressure from American buyers that wanted them. I read a survey that said that was the most important option desired by Americans.

Driving is a serious business in Germany, cupholders never fitted in their automobile culture.

Some American made minivans had 17 cupholders in them. The latest Chrysler cars have heating and cooling features in their cupholders if you want them.

__________________
1991 560 SEC AMG, 199k <---- 300 hp 10:1 ECE euro HV ...

1995 E 420, 170k "The Red Plum" (sold)

2015 BMW 535i xdrive awd Stage 1 DINAN, 6k, <----364 hp

1967 Mercury Cougar, 49k

2013 Jaguar XF, 20k <----340 hp Supercharged, All Wheel Drive (sold)