|
|
|
|
|
#1
06-17-2001, 01:09 AM
|
|||
|
|||
|
My 1988 300E oil level light comes on during left cornering and hard braking unless the oil level is right at the full mark on the dipstick. I understand that there is supposed to be a delay built in so that the oil level has to remain low for approx. 45 seconds before the light comes on. My light is not acting this way for sure. Is there something that can be replaced or repaired to make it so it doesn't come on? Thanks in advance.
Steve 
|
|
#2
06-17-2001, 08:23 AM
|
|||
|
|||
|
All of the delay circuit is in the GAUGE assembly & is somewhat $$$$$.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
06-17-2001, 04:42 PM
|
|||
|
|||
|
Could it possibly just be a cold solder joint (like everything else that is electrical with these cars of this age). If not I will just have to live with it I guess.
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fuel level sending unit question | braverichard | Diesel Discussion | 22 | 09-05-2007 06:54 AM |
| Outermost rear tail light bulb question | JHZR2 | Diesel Discussion | 3 | 03-30-2004 11:02 AM |
| AT Fluid Level Question | Dopey | Vintage Mercedes Forum | 1 | 03-08-2004 10:12 AM |
| '92 300E, "Glowing" Warning Light, Water Level | LAFetner | Tech Help | 2 | 04-29-2002 09:04 PM |
| C200 Coolant level light won't go out - HELP! | chap_C200 | Tech Help | 6 | 02-07-2002 03:21 PM |
Linear Mode
