Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-16-2001, 06:17 PM
angbrian
Guest
 
Posts: n/a
Could anybody tell me the location for the regeneration valve? It is used for petrol vapour control so I guess it should be somewhere near the tank. the part no is 2024700093.
Its under fuel vapour system in the CD i saw at the parts shop but it doesnt tell you the location within the car. Its attached to a carbon filter.

The car in question is a 124 with a 111 engine(in line 4 2199cc). Its is the 16v model.

btw, the 16v thats constantly referred to in this lists, is it the 4 cylinder model?

thanks
Reply With Quote
  #2  
Old 06-17-2001, 09:27 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Purge Valve

ON the US model C220, the valve is on the left frame rail under the hood next to the w/s washer reservoir.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 06-17-2001, 09:40 AM
angbrian
Guest
 
Posts: n/a
are we talking about the same thing? Its a device with 2 nozzles and a socket for electrical connection.

could you help me with this: "btw, the 16v thats constantly referred to in this lists, is it the 4 cylinder model? "


Thanks
Reply With Quote
  #4  
Old 06-18-2001, 11:08 AM
angbrian
Guest
 
Posts: n/a
This is getting really weird. Visited a mechanic today and we look all over the car and we just couldnt find a similiar looking part. The closest looking thing is this device that has "MOT" written on top on the electrical connector.

The mechanic then ask me if I got the correct part. He said that since the part no starts with a 202, it could very well be a C class parts, not 124.

I remember very strongly I got the part no of the CD, first at the agent and then at a parts dealer. I am very positive that the part no was obtained under the 124 section.

Could anybody confirmed what the mech said? that 202 means its a part for C class..
thanks
Reply With Quote
  #5  
Old 06-18-2001, 01:52 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Sounds as though you have found the valve as ours does say MOT on top. OUR part number is 000-470-22-93.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #6  
Old 06-19-2001, 04:30 AM
angbrian
Guest
 
Posts: n/a
Would you know what this MOT thing is suppose to do? Or what are the symptoms if it does go kaput? but i doubt this MOT part is the one I am suppose to change.

Went back to parts dealer again and we reconfirmed that this is indeed a w124 part, or at least the cd says so. Problem is that the cd doesnt tell where it is in the car. It is located beside the charcoal cansiter(it looks more like a rectangular box than a canister but anyway...).

Hope this might ring a bell on the location. Found out not every model have this device(its under evaporation control i think).

The last resort would be going back to the dealer but they quoted me 300SGD +++; when it looks like i can do it under 5 secs so long as I know where it is located and it costs me only 30 bucks!
Reply With Quote
  #7  
Old 06-19-2001, 04:30 AM
angbrian
Guest
 
Posts: n/a
Would you know what this MOT thing is suppose to do? Or what are the symptoms if it does go kaput? but i doubt this MOT part is the one I am suppose to change.

Went back to parts dealer again and we reconfirmed that this is indeed a w124 part, or at least the cd says so. Problem is that the cd doesnt tell where it is in the car. It is located beside the charcoal cansiter(it looks more like a rectangular box than a canister but anyway...).

Hope this might ring a bell on the location. Found out not every model have this device(its under evaporation control i think).

The last resort would be going back to the dealer but they quoted me 300SGD +++; when it looks like i can do it under 5 secs so long as I know where it is located and the fact that it costs me only 30 bucks doesnt help!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Regeneration Valve Cigar Havana Tech Help 0 09-15-2004 12:27 AM
W126 Valve Stem Seal replacement DONE! donbryce Tech Help 19 07-28-2004 09:16 AM
Valve cover gasket replacement 95 E320. 71Rcode Tech Help 0 03-10-2004 09:44 PM
Idle Control Valve Location Bobl84 Tech Help 4 06-01-2003 09:45 AM
Heater valve location 190e ronald_m Tech Help 5 06-01-2002 07:30 PM



All times are GMT -4. The time now is 06:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page