|
|
|
#1
|
|||
|
|||
'88 300Se stalling
I have a 1988 300se with 187,000 miles on it,(bought on E-Bay) had the head replaced 8 months ago due to worn guides. now, the car will not stay at idle at times, and when i let out the throttle to turn, it stalls. i replaced the cap, rotor, wires and plugs w/ OEM parts. At times, i will turn the key without touching the throttle (approx. 7 times) and it will start fine, then it will go back to not idling or it hesitates bad when starting out. I have replaced the idle control, (E-Bay) it ran fine for 2 days then back to the same old headache. i love this car and want to keep it, i want to DIY, but i am intimidated to DIY because it is expensive to r&r parts just to troubleshoot. also, will buying a CD repair help, and where can i get one?
|
#2
|
||||
|
||||
PM me you email address and I will send you an attachment that might help you get going on diagnostics. Particularly idles speed stabilization
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
Bookmarks |
|
|