|
|
|
#1
|
|||
|
|||
W126 Rear External Door Handle Assembly Removal
Are there instructions for this anywhere?
The rear passenger door does open from the outside but not normally. It pulls straight out but there is no sound of the internal mechanism being part of the process as with the other handles. I want to replace the door handle assembly from the parts car while the door panel is off when I replace the door check.
__________________
1990 560SEL Anthracite Gray 1990 300SE Arctic White (parts) |
#2
|
|||
|
|||
Remove the phillips at the end of the door, that will allow the handle to slide forward & come out.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Thanks - I thought it would be an ordeal.
Hopefully it's just a faulty handle mechanism that's causing it to pull out without catching anything.
__________________
1990 560SEL Anthracite Gray 1990 300SE Arctic White (parts) |
Bookmarks |
|
|