w126 blower motor area / components
 

evening everyone,

a buddy of mine just bought a 90' 300SE. The blower motor area is missing some components. I was just wondering if anyone had any picture of that area from their 2nd gen w126. I'd like to do a comparison. So far I believe that the blower regulator is missing (the bottom of the blower motor housing is off and there is nothing down there..i assume thats where it connects up to Im not sure) and I believe that the electronic control box for the blower motor is missing too. There is a 3-pin (4pin plug) connector to the left of the housing that isnt plugged into anything.


If anyone can lend a hand with a photo It would be greatly appreciated.

-Kris

Sorry no pic, but the regulator goes into the blower housing far right side next to the motor. The regulator then connects to the blower motor and your 3-4 pin plug connector this comes though the housing right of the blower motor.

Hope This Helps!