I have 1995 S 420 anbd want to change the break fluid myself. I wanted to know if any one had done a break fluid change with out using a flushing method that applies pressue to the fluid reservoir, but only by using a gravity method. That is open the bleader valves and as the old fluid flows out add new fluid to the reservoir.

Chuck Gainor

Good technical reading.

Brake
Brake:




Have a great day

__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/