|
|
|
#1
|
|||
|
|||
Hi,
Does any one know if the three screws in the rear of the ignition switch can be accessed by removing the knee bolster and ignition switch harness plug from under the dash. Really would like to replace it without having to mess with the instrument panel or the steering column. Any help appreciated on the easiest way to do this. Thanks, Gary |
#2
|
|||
|
|||
The complete steering lock must be removed to replace the switch. Takes about 1.4 hrs to do this.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
MB DOC,
Does this mean that I have to remove steering wheel, airbag and instrument panel to do this??? Or is there an easier way?????? Gary |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ignition switch ? | dieselbeagel | Diesel Discussion | 4 | 01-07-2004 12:16 AM |
New ignition switch? | gawlbpd | Diesel Discussion | 3 | 05-07-2003 10:09 AM |
Ignition switch doesn't turn off | DonCombest | Mercedes-Benz SL Discussion Forum | 1 | 10-12-2002 09:42 PM |
Cruis Control Switch Replacement | Vic Vicious | Tech Help | 1 | 08-05-2002 11:38 PM |
86 190E 2.3 Ignition Switch Probs? | ChinaClipper | Tech Help | 1 | 06-26-2002 07:46 PM |