Folks,

I took out my in-car temperature sensor for testing yesterday. After setting it out next to a digital thermometer for 30 minutes, I tested the resistance on it and it was within spec.

Next I tested the vacuum line that connects to it. No suction when putting a small piece of tissue on it. Next I need to test the aspirator blower which is on the other end of the tube. My CD shows that this is behind the glove box, but the 94/95 W124s do not have glove boxes.

Can someone tell me if the aspirator blower is indeed behind this area? What is the best way to get to it so that I can test/replace it without worry of accidently setting off the air bag?

Willy

__________________
Willy

'94 E420 White

Mods
-------
Berg Werks Keyless Entry
Buzzer replaced with Chime
Dash Light Upgrade
Burlwood/Leather shift knob
Alpine CDA-9815 Head Unit
2002/2003 16" C Class 7-Spoke Wheels
Updated "Chip" to fix Code 19 problem