Hey,
What gives.....12 volt 1.2 watt bulbs are soldered to
sockets. Was the plan of MBZ to replace them as an assy???

Have to bend prongs on 072601-12230 and take apart socket
assy to get replacements in. This is time consuming!!

Don't have soldering iron that small to solder in new
bulbs. Could only press in and hope for the best using
a wire to test from #1 dash bulb to see if it works.

Gary

There were actually two types, those in the holder and those loose. You can have either one...
They are available as a part made together.

__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS

Benzmac,
Thanks for replying. This was driving me nuts. I was
given the loose ones at dealer. Since I need to get this
running tonite, I'll ask for the other type.

Gary