560 water pump torque value
 

I am in the middle of a pump change,, I can not find my CD, Does any one have the torque value for the 8x1.25 bolts that hold the pump housing into the block?

Thanks
John

It's back together
 

Thanks to all especially Strife who send me the e-mail with the values. Its back together. I just moved and could not find my CD. OH by the way the shaft is in the low pressure section, so a slow leak with not leak with the engine running, If you loosen the pressure cap. I made it home 497 miles with no loss of cooling fluid.
On the 560 you do have to remove the harmonic balancer even if you have the offset 13 mm wrench, the bolt is longer than the clearance. I just loosened everything and removed all the belts and large hoses. Left the radiator in, but covered it with cardboard. Came out easy enough I was putting it back together when I could not find the torque, It took about 10 Hours total, with only the notes from this site for guidance, but it went fine it is a 5 of 10 for difficult. Thanks to all.