|
|
|
#1
|
|||
|
|||
Oil pan 0-ring
When i was changing my motor mounts on the CE yesterday, I noticed a drop or two of oil on the oil pan.
It seems like on the side of the oil pan...there is a sensor or something that goes in the side... Is there an o-ring or gasket that holds that thing in? It's on the drivers side... i guess it's the oil level sensor. If there is an o-ring... is it hard to remove this? I would do it the next time I changed the oil
__________________
1989 300ce 129k ( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone) 1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus 1994 e320 Cabriolet 108k 1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it [/SIGPIC] |
#2
|
||||
|
||||
Oil pressure sensor...has a rubber o ring on it. it like to leak bad when it deteriorates. Get a new o ring from the dealer if you cant find it online. the sender is likely just fine. Replace the o ring whenyou change the oil. Easy job, two bolts and it is off, replace o ring and reinstall.
__________________
Christopher Henkel 1990 190E 2.6 - Arctic white SOLD 1986 190E-16v - Blauswartze 1993 300CE - SOLD 2003 W208 CLK 320 Cabriolet - Magma Red |
#3
|
||||
|
||||
The sensor in the pan is the oil level sender.
|
#4
|
||||
|
||||
Yes, Oil level sender, I got ahead of myself. Oil pressure is at the filter. Sorry.
__________________
Christopher Henkel 1990 190E 2.6 - Arctic white SOLD 1986 190E-16v - Blauswartze 1993 300CE - SOLD 2003 W208 CLK 320 Cabriolet - Magma Red |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|