Removing Sway Bar Link - Top screw????????
 

After reading this forum, I've purchased Sway Bar Links for the (W140) 1992 500SEL.

The bolts have been removed, but the top section will not come off. I have removed the rotor, then the nut for the link - but the link will not drop off.

Hmmmm???

Is it "stuck", which is remedied with a big hammer, or is it screwed in with threads?

In short - ho9w do I remove the current Sway Bar Links on the 500SEL? I have removed the sway bar, but the right and left links are just hanging there.

Many thanks

Once the rotor is off...the link should come right out..try the hammer

Correct answer - thanks - Wack it with a hammer.
 

:P
Thank you much

I feared wacking it with a hammer, if it was screwed in.

I wacked away, and it came loose, with no issues.

Many thanks