First I would like to say that I have done a search on this subject with few results.(ineffective key words?)
How do I go about flushing the cooling sys in my 1991 420SEL? Thanks in advance for your reply. |
Fred:
I searched the archives too. Don't own a 420 but have been considering one, hence the curiosity. In one post, Benzmac indicated the block as well as the radiator could be drained. When I change my coolant, I remove the T-stat so I can forward/reverse flush. The 103 motors have a 19mm plug on the passenger side that's easy to get at. Your V-8s engine plug may be a bit harder to get at? If you don't receive anything here, you may need to refer to the 126 CD-Rom. |
All times are GMT -4. The time now is 03:19 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website