"To Seal, or not to Seal,--that is the question:--
Whether 'tis nobler in the mind to suffer The drips and leaks of not using sealant Or to take arms against a sea of troubles, And by applying sealant end them?" Should I use sealant when replacing my dented lower oil pan and gasket? Are sealant and adhesive the same thing? If not, should I use adhesive or sealant or nothing? What does everyone think? Please share your experiences. What brand is best? Thanks James Philadelphia PA 79 300CD 234000 My First Benz - I Love It! |
Not usually recommended for newer cars, but your 79 would not object to a fine bead of Silicone RTV on either side of the pan gasket.
|
I am of the opinion that a very thin film of Ultra Copper
goes a long way toward insuring a good seal. Be real careful and don't put on much because what you see squeezed out on the outside is the same as what is squeezed out on the inside and if what is squeezed out on the inside breaks loose then it can cause some serious problems in those tiny oil passages. |
All times are GMT -4. The time now is 03:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website