190E 2.6 1992 Transmission slip in reverse
 

I have a 1992 190E 2.6 auto trans.
Trans shifts slow into reverse at all times...however when warm the trans will slip in reverse. If on a flat surface it will engage an roll in reverse, but if I apply throttle it will slip...

Can anyone tell me if there is an external adjustment are repair to correct this problem?

Thank you.

MBZ Manny:confused:

Reverse speed is operated by a clutch pack...MB designation is LB3. Inter repairs needed.

Have you looked at this?

http://www.peachparts.com/shopforum/tech-help/209298-successful-722-4-rebuild.html?highlight=722.4

Andrew
1989 190e 2.6