|
|
|
#1
|
|||
|
|||
Just how difficult is this job? Is there anything I should know before I start?
|
#2
|
|||
|
|||
Somebody must have done this before, I would be grateful for any help before this weekend.
|
#3
|
|||
|
|||
Remove the brake caliper, remove the locking wheel bearing nut using a 5MM allen then remove the hub and rotor. Put the rotor in a vise and remove the 5 10MM allen screws. Reverse the order to install. It's a good idea to clean and repack the wheel bearings at the same time. When tightening the wheel bearings use a feeler gage and allow .004 clearance between the nut and the bearing.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
High Idle 1989 420 SEL - Solved | Cigar Havana | Tech Help | 2 | 02-22-2005 07:26 PM |
replace thermostat on 1987 420 SEL | RKreutzer | Tech Help | 7 | 02-07-2003 02:12 AM |
Cross Drilled Rotors 420 560 300sdl | matt forsyth | Mercedes-Benz Used Parts For Sale & Wanted | 1 | 01-30-2003 01:08 PM |
W126 420 SEL Dome light diagnosis help... | 96C220 | Tech Help | 14 | 11-07-2002 01:11 AM |
Front rotors | rsl007 | Tech Help | 7 | 11-27-2001 01:13 PM |