Hello, all. I've been doing a bit of tinkering on my recently purchased '97 S420 and one of the things I'm trying to get right is the feel of the brake pedal. When I apply the brake, it feels like there is 1/2 to 1 inch of "slop" in the pedal before it makes contact with the rest of the braking system. Is there any way to adjust this? I looked it up on alldatadiy.com but there wasn't a whole lot there that was useful.

The brakes themselves work good, with plenty of pads and fresh fluid, and a good feel (once the pedal makes contact, that is!).

__________________
"It's not about how fast you can go, but how well you can go fast."

Bob in Richmond

'97 S320 (LWB), Ruby Red Metallic, 73k miles
'97 S420V, Smoke Silver Metallic, 155k miles