|
|
|
#1
|
|||
|
|||
2000 S500
Front suspension squeak . If you jack up the front end the squeak will go away for 1 to 2 miles then come back. I tried spray on the sway arm bushings, no good. Then tried lube on rack shaft because the squeak happened standing still just moving the wheel a little. Thanks for your help
|
#2
|
|||
|
|||
The "early" W220 chassis is somewhat WEAK. Lower control arms & ball joints have been modified due to premature wear.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
If it sounds like a creaky hinge, it's probably the lower ball joints. We do several dozen every month.
|
#4
|
|||
|
|||
Thanks for all the help.I tried putting a few drops of oil behind the rubber boot and it took the squeak out so I ordered lower ball joints. Thank again
|
#5
|
|||
|
|||
Replaced one side today, what a job. The lower ball joint is pressed in so
tight I had to remove the hole pick and press it off on the bench vice. The other side won't take as long now I have one under my belt. Thanks for the help Joe |
Bookmarks |
|
|